How to apply a Sony WF-1000XM4 Earbuds skin
Sony WF-1000XM4 earbud skin installation video
Follow our WF-1000XM4 tutorial and identify the small exterior pieces supplied with your order. Check each intended surface before peeling, including any charging-case pieces in your selected coverage.
Watch on YouTube ↗Before you start
Check WF-1000XM4
Confirm the earbuds, not WH-1000XM4 headphones or another WF generation. Match the pieces to your selected coverage.
Prepare the surfaces
Disconnect charging and follow Sony's cleaning guidance. Keep moisture away from contacts, microphones and openings, and let surfaces dry.
Handle small sections carefully
Use clean hands and good lighting. Leave unused pieces on the backing and avoid touching the adhesive.
Fitting your WF-1000XM4 skins
Use the video for exact placement and application order.
-
Check orientation
Compare each piece with its intended perimeter and cut-outs before firm pressure. Do not stretch it into place.
-
Apply progressively
Follow the backing-removal method shown and smooth gradually, avoiding repeated lifting and pulling.
-
Finish the curves
Follow the supplied method for shaped surfaces. Do not use a heat gun or overheat the earbuds or case.
-
Check charging clearances
Keep contacts, sensors, microphones, sound outlets and ports clear. Check that earbuds seat and any case lid moves without force.
Installation questions
Can the skin cover a microphone or sensor?
No. Apply each piece only to its intended surface and keep all functional openings and contacts clear.
What if a piece wrinkles?
Stop before stretching it further. Check the method shown or send us a close-up so we can help with that piece.