How to apply a Dell XPS 13 2-in-1 (7390) skin
Dell XPS 13 2-in-1 7390 skin installation video
Follow our XPS 13 2-in-1 7390 tutorial and check the convertible model against your order. Identify each intended exterior panel before peeling.
Watch on YouTube ↗Before you start
Confirm the 2-in-1
Check the full model description, not just 7390 or XPS 13. Match the selected panels to your order.
Clean and dry
Shut down and unplug the device. Follow Dell's cleaning advice and keep moisture away from openings.
Prepare to fit
Use a stable, clean workspace and good lighting. Keep unused panels on the backing and the supplied instructions nearby.
Fitting your XPS 13 2-in-1 skin
-
Check each perimeter
Compare all edges and openings before firm pressure. Do not stretch a panel into position.
-
Apply progressively
Follow the backing-removal method shown. Smooth gradually across each intended surface without trapping folds.
-
Keep moving parts clear
Leave hinges, vents, feet, ports, speakers and keyboard openings unobstructed. Do not bridge a moving seam.
-
Inspect clearances
Check that the skin does not catch during normal movement. Do not force the hinge or trim vinyl on the device.
Installation questions
Can I use a standard XPS 13 skin?
Use a skin specifically listed for your 2-in-1 model. Similar names or fitting methods do not establish matching panels.
What about bubbles or lifting?
Avoid pins and heavy pressure. Read our fitting troubleshooting guide.