How to apply a Lenovo Legion Go skin
Watch first. Fit with confidence.
Lenovo Legion Go skin installation video
Follow our Lenovo Legion Go fitting video and keep these reminders handy. Identify each piece before peeling, especially around the controls and separate moving sections.
Pause and replay each stage. Watch on YouTube ↗
A little preparation goes a long way
Before you start
Check your model
Confirm your exact Legion Go model and coverage. Identify the intended body and controller pieces while they remain on the backing.
Clean and dry
Power off, unplug and let the device cool. Follow Lenovo's surface-care advice and keep cleaning moisture away from openings.
Set yourself up
Use a clean, well-lit workspace and clean, dry hands. Watch the video first and keep the supplied instructions beside you.
Fitting your Legion Go skin
Use the video for the exact positioning and order. Coverage depends on the option you ordered.
-
Match each panel
Check the intended edges and control cut-outs before pressing firmly. Do not stretch a panel into position.
-
Apply gradually
Follow the backing-removal method shown, smoothing progressively and avoiding unnecessary contact with the adhesive.
-
Finish shaped areas
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make the device hot.
-
Check the controls
Keep vents, ports, speakers, sticks, buttons and moving joints unobstructed. Do not bridge separate moving sections with vinyl.
Installation questions
Should the skin cover vents or controller joints?
No. Fit each piece only to its intended exterior surface and leave ventilation and moving parts clear.
What if a control cut-out will not align?
Check the model, piece and orientation. Stop before stretching or trimming the skin and send us a photo.
What about bubbles or lifting?
Avoid pins and extra force. See our fitting troubleshooting guide or ask us for help.