How to apply a MacBook Air 13.6" (2022, M2) skin
Watch first. Fit with confidence.
MacBook Air 13.6-inch M2 skin installation video
Follow our video for the 2022 MacBook Air 13.6-inch M2. Identify the lid, bottom and any other panels in your order before you start; coverage depends on the option selected.
Watch on YouTube ↗Before you start
Check the model
Confirm the 13.6-inch M2 Air and your selected panels. Do not assume an older wedge-shaped Air uses the same skin.
Prepare the surfaces
Shut down and unplug the MacBook. Follow Apple's cleaning advice, keep moisture away from openings and let surfaces dry fully.
Make room to work
Use a clean, stable surface and good lighting. Keep unused panels on the backing and your fitting instructions nearby.
Fitting your MacBook Air skin
Use the video for the exact reference points and application order.
-
Align the lid panel
Compare the outer perimeter before pressing firmly. Where your skin has a logo cut-out, check it alongside the edges rather than using it alone.
-
Smooth progressively
Follow the backing-removal method shown. Work gradually across the panel without stretching the vinyl.
-
Check additional panels
Match each supplied piece to its intended surface. Keep feet, hinges, ports, keys and functional openings clear.
-
Inspect the finish
Check that edges sit neatly and nothing interferes with opening or closing. Do not trim the skin while it is on your MacBook.
Installation questions
What if the logo and edges will not line up?
Check model, orientation and panel position. Do not stretch the vinyl to compensate. Send us a photo before continuing.
How should I deal with bubbles?
Avoid pins and heavy pressure. Read our bubbles and lifting guide.