How to apply a PS5 Pulse 3D Wireless Headset skin
PS5 Pulse 3D headset skin installation video
Follow our Pulse 3D headset fitting video and check the exterior pieces supplied with your order. Take your time around the ear-cup edges, controls and intended headband areas.
Watch on YouTube ↗Before you start
Check Pulse 3D
Confirm the headset model on your order, not another PlayStation headset. Identify each piece and intended side.
Clean and dry
Turn off and unplug the headset. Follow Sony's cleaning guidance, keeping moisture away from openings and cushions.
Prepare your workspace
Use clean hands and good lighting. Leave unused sections on the backing and follow the supplied instructions.
Fitting your Pulse 3D skin
-
Check control-area alignment
Compare each perimeter and cut-out before pressing. Do not stretch a piece around a button or port.
-
Apply gradually
Follow the backing-removal method shown and smooth progressively, avoiding unnecessary adhesive handling.
-
Finish curved areas
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or overheat the headset.
-
Inspect the finish
Keep microphones, controls, ports and acoustic openings clear. Cushions, adjustment and moving parts must remain unobstructed.
Installation questions
Can I use a different PlayStation headset skin?
Use the template made for Pulse 3D. A similar fitting method does not mean other headset skins are interchangeable.
What about wrinkles or lifting?
Do not stretch the vinyl further. Read our troubleshooting guide or send a photo.