How to apply a Samsung Galaxy A5/A3 2017 skin
Watch first. Fit with confidence.
Galaxy A5 and A3 (2017) skin installation video
Follow our Samsung Galaxy A5/A3 2017 fitting video and check the model year on your order. Keep the reminders below handy while fitting your chosen pieces.
Clear skin? Follow the dedicated clear-skin instructions instead of these dry-vinyl reminders.
Watch on YouTube ↗Before you start
Check model and year
Match A5 or A3 and the 2017 version to your order. A shared guide does not make the two skin sizes interchangeable.
Clean and dry
Switch off and unplug the phone. Follow Samsung's cleaning advice and keep moisture away from openings. Let surfaces dry fully.
Set yourself up
Use clean, dry hands and a well-lit workspace. Watch the video first with your supplied instructions beside you.
Fitting your Galaxy A-series skin
Use the video for exact positioning and order. Coverage depends on your chosen option.
-
Check alignment
Compare the camera opening and intended outer edges before pressing. Do not stretch the skin to correct its position.
-
Apply gradually
Follow the backing-removal method shown and smooth progressively without repeatedly pulling a section.
-
Finish the curves
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make your phone hot.
-
Inspect the fit
Keep lenses, flash, buttons and ports unobstructed. Do not force a tight case over the skin if it catches an edge.
Installation questions
What if the panel seems too large or too small?
Check both the A3/A5 model and its year. Do not stretch or trim it on your phone; contact us with a photo.
What about bubbles or lifting?
Avoid pins and extra force. See our fitting troubleshooting guide.