How to apply a Samsung Galaxy S10E skin
Samsung Galaxy S10e skin installation video
Follow the Galaxy S10e fitting video. Check the final letter on your order: the S10 family name alone is not enough to choose a skin.
Clear skin? Use our clear-skin wet-fitting guide instead.
Watch on YouTube ↗ · Pause and replay each stage.
Model not listed? A similar model with the same skin type shows the basic fitting method. Cut-outs can differ; use a skin made for your exact device.
Before you start
Confirm S10e
Match your model and chosen coverage. Leave unused pieces on their backing.
Clean and dry
Switch off and unplug. Follow the manufacturer's surface-care advice and let surfaces dry.
Prepare to fit
Use clean hands, good lighting and your supplied instructions.
Fitting your Galaxy S10e skin
Use the video for exact positioning and application order.
-
Check the reference points
Compare the camera opening and outside margins before pressing firmly.
-
Smooth progressively
Follow the backing-removal method shown and avoid touching the adhesive.
-
Finish without pulling
Use gentle hairdryer warmth only where instructed. Do not stretch a piece to fit or overheat the phone.
-
Check all controls
Keep buttons, sensors and ports clear. Inspect side sections before fitting a case.
Installation questions
Will a standard S10 skin fit?
Use a skin made for S10e. The standard model has its own S10 guide.
What about bubbles or lifting?
Do not use a pin or extra force. Read our troubleshooting guide.
All installation guides →