How to apply a Samsung Galaxy S24/S24 Plus series skin
Watch first. Fit with confidence.
Samsung Galaxy S24 and S24 Plus skin installation video
Follow our Galaxy S24 and S24 Plus fitting video, then keep these reminders handy. Check the exact model and the pieces in your order before peeling the backing.
Pause and replay each stage. Watch on YouTube ↗
A little preparation goes a long way
Before you start
Check your model
Match S24 or S24 Plus on your order to your phone. Identify the intended pieces and leave unused sections on the backing.
Clean and dry
Switch off and unplug your phone. Follow Samsung's surface-care advice, keep moisture away from openings and let surfaces dry fully.
Set yourself up
Use clean, dry hands and a well-lit workspace. Watch the video first with your supplied fitting instructions beside you.
Fitting your Galaxy S24 skin
Use the video for exact positioning and order. Coverage depends on your chosen option.
-
Check the alignment
Compare the camera cut-outs and intended edges before pressing firmly. Do not stretch the skin to make an opening reach.
-
Apply gradually
Follow the backing-removal method shown and smooth down progressively, avoiding unnecessary contact with the adhesive.
-
Finish curves carefully
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make your phone hot.
-
Inspect the fit
Check that camera lenses, buttons, microphones, speakers and ports remain clear. Do not force a tight case over an edge.
Installation questions
Will the same skin fit both models?
No. Follow the shared technique, but use a skin made for the exact phone model you own.
What if the camera cut-out will not line up?
Check the model, piece and orientation before pressing. Do not pull or trim the skin on your phone; send us a photo for help.
What about bubbles or lifting?
Avoid pins and extra force. See our fitting troubleshooting guide.