How to apply a Samsung Galaxy S8 Plus skin
Watch first. Fit with confidence.
Samsung Galaxy S8 Plus skin installation video
Follow our Galaxy S8 Plus fitting video. Check your exact model and identify the camera, sensor and side pieces in your order before peeling.
Clear skin? Clear Matt and Clear Gloss need the separate wet-fitting guide.
Watch on YouTube ↗Before you start
Check the Plus model
Confirm Galaxy S8 Plus on your order, not the smaller S8. Identify your coverage pieces and leave unused sections on the backing.
Clean and dry
Switch off and unplug the phone. Follow Samsung's cleaning advice and keep moisture away from openings. Let surfaces dry fully.
Prepare your space
Use clean, dry hands and a well-lit workspace. Watch the video first with your fitting instructions nearby.
Fitting your Galaxy S8 Plus skin
Use the video for exact positioning and order.
-
Check the reference points
Compare the camera and sensor cut-outs with the intended edges before pressing. Do not stretch vinyl into place.
-
Smooth progressively
Follow the backing-removal method shown and work gradually without repeatedly lifting the adhesive.
-
Finish curved edges
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make the phone hot.
-
Inspect the fit
Keep lenses, sensors, buttons and ports unobstructed. Do not force a tight case over an edge.
Installation questions
What if the camera or sensor opening does not align?
Check the exact model, piece and orientation. Do not pull or trim the skin on the phone; send a photo.
What about bubbles or lifting?
Avoid pins and extra force. See our fitting troubleshooting guide.