How to apply a Samsung Galaxy Z Flip skin
Samsung Galaxy Z Flip skin installation video
Follow our original Galaxy Z Flip tutorial for the intended exterior skin pieces. Check the exact generation and coverage on your order before peeling.
Clear skin? Check your product's fitting instructions and our clear-skin guide. Do not assume a foldable phone is suitable for wet fitting.
Watch on YouTube ↗Before you start
Confirm the generation
Check the original Galaxy Z Flip against your order. Identify each exterior piece and its orientation.
Clean and dry
Switch off and unplug the phone. Follow Samsung's cleaning advice and avoid moisture or pressure around the hinge and display.
Prepare to fit
Use clean hands and good lighting. Keep unused pieces on the backing and follow the video and supplied instructions.
Fitting your Galaxy Z Flip skin
-
Match the exterior pieces
Check camera and outer-display openings before pressing. Do not stretch a piece into position.
-
Apply progressively
Follow the backing-removal method shown, smoothing each intended panel without bridging moving parts.
-
Finish curves gently
Use gentle hairdryer warmth only where instructed. Do not overheat the phone or press against the inner display.
-
Inspect moving clearances
Keep the hinge mechanism, screens, cameras, buttons and ports unobstructed. Stop if anything catches when the phone moves.
Installation questions
Can I put an exterior skin on the folding screen?
No. Fit only to the exterior surfaces intended for the supplied pieces. This guide is not for replacing an inner-screen protector.
What about bubbles or lifting?
Avoid pins and force. Read our troubleshooting guide or send a photo.