How to apply a Sony WH1000XM3 Wireless Heaphone skin
Sony WH-1000XM3 skin installation video
Watch our WH-1000XM3 headphone fitting tutorial and identify the pieces included with your order. Work carefully around curved ear cups and the intended headband surfaces.
Watch on YouTube ↗Before you start
Check WH-1000XM3
Confirm the headphone model, not WF-1000XM3 earbuds or another XM generation. Match each supplied piece to its intended surface.
Prepare the surfaces
Switch off and unplug the headphones. Follow Sony's cleaning guidance and let surfaces dry, keeping moisture away from cushions and openings.
Set yourself up
Use clean hands and good lighting. Leave unused pieces on the backing and keep your instructions beside you.
Fitting your Sony XM3 headphone skin
-
Compare each cup piece
Check left and right orientation, the perimeter and any functional cut-outs before firm pressure.
-
Smooth gradually
Follow the backing-removal method shown. Do not stretch a piece to make an opening reach.
-
Finish the curves
Use gentle hairdryer warmth only where instructed. Avoid heat guns and excessive heat.
-
Inspect movement and access
Keep ports, microphones, controls and acoustic openings clear. Check folding and adjustment without forcing anything.
Installation questions
Can I use the WF-1000XM3 video instead?
WH identifies these over-ear headphones; the WF-1000XM3 guide is for a different product. Follow this video with the correct headphone skin.
What about bubbles or lifting?
Avoid pins and extra force. Read our troubleshooting guide.