How to apply a Sony Xperia 1 II skin
Sony Xperia 1 II skin installation video
Watch our Xperia 1 II fitting video before peeling your skin. Confirm both the Xperia number and generation on your order, then identify the sections you selected.
Fitting a clear skin? Follow the clear-skin guide and check device suitability before wet fitting.
Pause and replay each stage. Watch on YouTube ↗
Can't see your model listed? A similar model with the same skin type shows the basic fitting method. Cut-outs and alignment may differ: use a skin made for your exact device.
Before you start
Confirm Xperia 1 II
Match the complete model name to the order. Keep unused sections on the backing.
Clean and dry
Switch off and unplug. Follow the manufacturer's surface-care advice and let fitting surfaces dry fully.
Watch before peeling
Use clean, dry hands and good lighting, with your supplied instructions nearby.
Fitting your Xperia 1 II skin
Follow the video for exact positioning and application order.
-
Check the reference points
Compare the camera cut-outs with the outside margins before pressing firmly.
-
Work progressively
Use the backing-removal method shown and smooth gradually without touching the adhesive.
-
Finish without pulling
Use gentle hairdryer warmth only where instructed. Do not stretch a piece to fit or make the phone hot.
-
Inspect the edges
Keep all controls, sensors and ports unobstructed. Check that a case does not catch the skin.
Installation questions
Is this the Xperia 1 III guide?
Use our Xperia 1 III installation video for that generation. Match your skin to your exact phone.
What if a cut-out is misaligned?
Stop and check the model, piece and orientation. Do not stretch or cut the skin on your phone; send a photo before trying again.
Bubbles, wrinkles and lifting help →