How to apply an Amazon Echo Dot skin
Watch first. Fit with confidence.
Amazon Echo Dot skin installation video
Follow our Echo Dot fitting video and identify the intended exterior pieces before starting. Check the exact generation of your speaker against your order.
Watch on YouTube ↗Before you start
Check the generation
Confirm the exact Echo Dot generation and coverage in your order. Keep unused pieces on the backing while checking their positions.
Unplug and clean
Disconnect the speaker and follow Amazon's cleaning advice. Keep moisture away from microphone and speaker openings.
Prepare your space
Use clean, dry hands and a stable, well-lit surface. Watch the video with your supplied fitting instructions nearby.
Fitting your Echo Dot skin
Use the video for the exact positioning and order.
-
Check the reference points
Compare control and connector openings with the intended edges before pressing. Do not stretch the skin into position.
-
Apply progressively
Follow the backing-removal method shown, smoothing gradually around the intended surface.
-
Finish the curves
Use gentle warmth only where specifically instructed. Do not use a heat gun or overheat the speaker.
-
Inspect the openings
Keep microphone holes, speaker grilles, controls, indicators and connectors unobstructed.
Installation questions
Should I cover the speaker grille?
No. Fit vinyl only to the intended exterior surfaces, keeping acoustic openings and microphones clear.
What if the seam or edge will not align?
Check your Echo Dot generation and the starting position shown. Do not stretch or trim it on the device. See our troubleshooting guide.