How to apply an Honor 6X skin
Watch first. Fit with confidence.
Honor 6X skin installation video
Use our Honor 6X fitting video to check the position of each piece before applying pressure. Match the exact model and coverage on your order first.
Clear skin? Follow the clear-skin wet-fitting guide instead of the dry method below.
Pause and replay as you fit. Watch on YouTube ↗
Can't see your model listed? Use a similar model with the same skin type — the basic fitting method is the same. Cut-outs and alignment may differ, so always use a skin made for your exact device. Clear skins need the separate wet-fitting guide.
Before you start
Check Honor 6X
Match your phone and order. Identify the pieces and leave unused sections on the backing.
Clean and dry
Switch off and unplug the phone. Follow the manufacturer's surface-care advice and allow fitting surfaces to dry.
Prepare your space
Use clean, dry hands, good lighting and the supplied instructions.
Fitting your Honor 6X skin
Use the video for the precise placement and application order of your selected coverage.
-
Check every cut-out
Compare the camera and other functional openings with the outer edges before pressing firmly.
-
Work progressively
Follow the backing-removal method shown. Smooth down gradually and avoid touching the adhesive.
-
Finish without pulling
Do not stretch the skin to make it reach. Use gentle hairdryer warmth only where instructed, without making the phone hot.
-
Inspect the finish
Keep controls, sensors and openings clear. Check that any case does not catch the edges.
Installation questions
Can a similar Honor video help?
Yes, for the basic fitting technique with the same skin type. The skin itself must be made for your exact device.
What if an opening is misaligned?
Stop and check the model and orientation. Do not cut the skin on the phone or stretch it into place.
What about bubbles or creases?
Do not use a pin or extra force. Read our troubleshooting guide.