How to apply an Honor 8 Pro skin
Watch first. Fit with confidence.
Honor 8 Pro skin installation video
Follow our Honor 8 Pro fitting video and check your exact phone against the order before peeling. Keep these reminders handy alongside the demonstration.
Clear skin? Use the separate clear-skin instructions, not these dry-vinyl reminders.
Watch on YouTube ↗Before you start
Check the Pro model
Confirm Honor 8 Pro on your order, not Honor 8. Identify your coverage pieces and leave unused sections on the backing.
Clean and dry
Switch off and unplug the phone. Follow the manufacturer's cleaning advice, keep moisture away from openings and let surfaces dry.
Prepare your space
Use clean, dry hands and a well-lit workspace. Watch the video first with your supplied instructions nearby.
Fitting your Honor 8 Pro skin
Use the video for exact positioning and order.
-
Check alignment
Compare the intended edges, camera and sensor openings before pressing. Do not stretch the skin into place.
-
Apply gradually
Follow the backing-removal method shown and smooth progressively without repeatedly pulling the adhesive.
-
Finish the curves
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make the phone hot.
-
Inspect the fit
Keep lenses, sensors, flash, buttons and ports unobstructed. Do not force a tight case over an edge.
Installation questions
What if the camera or sensor opening does not match?
Check the exact model, piece and orientation. Do not pull or trim vinyl on the phone; send us a photo.
What about bubbles or lifting?
Avoid pins and extra force. See our fitting troubleshooting guide.