How to apply an Huawei Mate 10 Pro skin
Watch first. Fit with confidence.
Huawei Mate 10 Pro skin installation video
Follow the Mate 10 Pro fitting video and check every piece against its intended surface. Confirm the Pro model on your order before peeling the backing.
Clear skin? Use our clear-skin wet-fitting guide instead of the dry method.
Pause and replay as you fit. Watch on YouTube ↗
Can't see your model listed? Use a similar model with the same skin type — the basic fitting method is the same. Cut-outs and alignment may differ, so always use a skin made for your exact device. Clear skins need the separate wet-fitting guide.
Before you start
Check Mate 10 Pro
Match the order to your exact phone. Identify the supplied pieces and keep unused sections on the backing.
Clean and dry
Switch off and unplug the phone. Follow the manufacturer's surface-care advice and let fitting surfaces dry.
Prepare to fit
Use dry hands, a clean workspace and good lighting. Keep your supplied instructions nearby.
Fitting your Mate 10 Pro skin
Follow the video for exact positioning and the order of your selected coverage.
-
Check the whole alignment
Compare the camera and other functional openings with the outer margins before pressing firmly.
-
Apply progressively
Use the backing-removal method shown and smooth down gradually. Avoid touching the adhesive.
-
Finish the edges
Use gentle hairdryer warmth only where instructed. Do not stretch the vinyl or make the phone hot.
-
Inspect before use
Keep controls, sensors and openings clear. Do not force a case over a skin edge that catches.
Installation questions
Does another Mate skin fit?
Use a skin made for your exact model. A shared fitting method does not mean different Mate models use the same skin.
What if a cut-out looks wrong?
Stop and check the model, piece and orientation. Do not stretch the skin or cut it while on the phone.
What about wrinkles or lifting?
Do not use a pin or extra force. See our fitting troubleshooting guide.