How to apply an iPad Pro 9.7" skin

← All installation guides

Watch first. Fit with confidence.

iPad Pro 9.7-inch skin installation video

Follow our iPad Pro 9.7-inch fitting video. Check the exact model and your chosen coverage before peeling, then keep these reminders handy.

Clear skin? Follow the dedicated clear-skin instructions, not these dry-vinyl reminders.

Watch on YouTube ↗
Can't see your model listed? Use a similar tablet with the same skin type for the basic fitting method. Panel shapes and cut-outs may differ, so always use a skin made for your exact device.

Before you start

Check your iPad

Match iPad Pro 9.7-inch to your order. Screen size alone does not identify every iPad model; check the full model details.

Clean and dry

Switch off and unplug the tablet. Follow Apple's cleaning advice, keep moisture away from openings and let surfaces dry.

Prepare your space

Use a clean, stable surface and clean, dry hands. Watch the video first with your fitting instructions nearby.

Fitting your iPad Pro skin

Use the video for the exact positioning and order.

  1. Check the outer edges

    Compare panel edges and camera cut-outs before pressing. Do not stretch the vinyl to make a corner reach.

  2. Apply progressively

    Follow the backing-removal method shown and smooth gradually without repeatedly pulling a large panel.

  3. Finish the contours

    Use gentle warmth only where instructed. Do not use a heat gun or overheat the tablet.

  4. Check the functions

    Keep cameras, microphones, speakers, buttons and connectors clear. Do not force a tight case over an edge.

Installation questions

What if the back panel does not match?

Check the full iPad model and the piece orientation. Do not stretch or trim the skin on the tablet; send us a photo.

What about bubbles or lifting?

Avoid pins and extra force. See our fitting troubleshooting guide.