How to apply an iPhone 7 Plus skin
Watch first. Fit with confidence.
iPhone 7 Plus skin installation video
Follow our iPhone 7 Plus fitting video and keep these reminders handy. Check your exact model and identify the pieces in your order before peeling.
Clear skin? Clear Matt and Clear Gloss need the separate wet-fitting guide.
Watch on YouTube ↗Before you start
Check your model
Match iPhone 7 Plus on your order to your phone. The standard iPhone 7 needs its own model-specific skin.
Clean and dry
Switch off and unplug the phone. Follow Apple's surface-care advice, keep moisture away from openings and let surfaces dry fully.
Set yourself up
Use clean, dry hands and a well-lit workspace. Watch the video first with your fitting instructions nearby.
Fitting your iPhone 7 Plus skin
Use the video for exact positioning and order. Coverage depends on the option you ordered.
-
Check alignment
Compare the camera opening and intended edges before pressing. Do not stretch the skin to make a cut-out reach.
-
Apply gradually
Follow the backing-removal method shown and smooth progressively, avoiding unnecessary contact with the adhesive.
-
Finish the curves
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make your phone hot.
-
Check the fit
Keep lenses, flash, buttons and ports clear. Do not force a tight case over the skin if it catches an edge.
Installation questions
What if the camera opening will not align?
Check the exact model, piece and orientation. Do not pull or trim the vinyl on the phone; send us a photo.
What about bubbles or lifting?
Avoid pins and extra force. See our fitting troubleshooting guide.