How to apply an iPhone 7 skin
Watch first. Fit with confidence.
iPhone 7 skin installation video
Follow our iPhone 7 fitting video, then keep these reminders handy. Check your exact model and the pieces in your order before peeling.
Clear skin? Clear Matt and Clear Gloss need the separate wet-fitting guide.
Watch on YouTube ↗Before you start
Check your model
Match iPhone 7 on your order to your phone. The larger iPhone 7 Plus needs its own model-specific skin.
Clean and dry
Switch off and unplug your phone. Follow Apple's surface-care advice, keep moisture away from openings and let surfaces dry fully.
Set yourself up
Use clean, dry hands and a well-lit workspace. Watch the video first with your supplied instructions nearby.
Fitting your iPhone 7 skin
Use the video for the exact positioning and order. Coverage depends on your chosen option.
-
Check the alignment
Compare the camera opening and intended edges before pressing firmly. Do not stretch the skin to make a cut-out reach.
-
Apply gradually
Follow the backing-removal method shown and smooth progressively, avoiding unnecessary contact with the adhesive.
-
Finish the curves
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make your phone hot.
-
Inspect the fit
Keep lenses, flash, buttons and ports clear. Do not force a tight case over a skin edge.
Installation questions
What if the camera opening will not line up?
Check the exact model, piece and orientation. Do not pull or trim the vinyl on the phone; send us a photo.
What about bubbles or lifting?
Avoid pins and extra force. See our fitting troubleshooting guide.