How to apply an Xiaomi Mi 10 skin
Xiaomi Mi 10 skin installation video
Follow our Mi 10 fitting video. Check the complete model name and compare every camera-area cut-out before peeling.
Clear skin? Check the clear-skin guide and device suitability before wet fitting.
Watch on YouTube ↗ · Pause and replay each stage.
Model not listed? A similar model with the same skin type shows the basic fitting method. Alignment may differ; your skin must match your exact device.
Before you start
Confirm Xiaomi Mi 10
Match your exact model and selected coverage. Leave unused pieces on the backing.
Clean and dry
Switch off and unplug. Follow the manufacturer's surface-care advice and let surfaces dry.
Prepare to fit
Use clean hands, good lighting and your supplied instructions.
Fitting your Xiaomi Mi 10 skin
Use the video for exact positioning and application order.
-
Check the camera area
Compare all openings with the outer margins before pressing firmly.
-
Smooth progressively
Follow the backing-removal method shown and avoid touching the adhesive.
-
Finish without stretching
Use gentle hairdryer warmth only where instructed. Do not pull a piece to fit or overheat the phone.
-
Inspect the fit
Keep cameras, sensors, controls and ports clear. Check that a case does not catch an edge.
Installation questions
Does another Mi 10-series skin fit?
Use the skin made for your exact model. Similar names and fitting methods do not establish compatibility.
What about bubbles or lifting?
Do not use a pin or extra force. Read our troubleshooting guide.
All installation guides →