How to apply a OnePlus 3 skin
Watch first. Fit with confidence.
OnePlus 3 skin installation video
Follow our OnePlus 3 fitting video and keep these reminders handy. Check the exact model and your chosen coverage before peeling the backing.
Clear skin? Use the clear-skin wet-fitting guide instead of these dry-vinyl reminders.
Watch on YouTube ↗Before you start
Check your pieces
Match OnePlus 3 on your order to your phone. Identify the back and any side pieces, leaving unused sections on the backing.
Clean and dry
Switch off and unplug the phone. Follow the manufacturer's surface-care advice and let the fitting area dry fully.
Prepare your space
Use clean, dry hands and a well-lit workspace. Watch the video first with your supplied instructions beside you.
Fitting your OnePlus skin
Use the video for the exact positioning and order of application.
-
Check alignment
Compare the intended edges and camera cut-outs before pressing. Do not stretch vinyl to make an opening reach.
-
Apply gradually
Follow the backing-removal method shown and smooth progressively, avoiding unnecessary contact with the adhesive.
-
Finish the curves
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make the phone hot.
-
Inspect the fit
Keep lenses, buttons, microphones and ports clear. Do not force a tight case over an edge.
Installation questions
What if the camera cut-out does not match?
Check the exact model, piece and orientation. Do not pull or trim the skin on the phone; send us a photo for help.
What about bubbles or lifting?
Avoid pins and extra force. Read our fitting troubleshooting guide.