Should You Choose a Logo Cut-Out on Your Skin?

Should You Choose a Logo Cut-Out on Your Skin?

Buying guide / Logo options

Show the logo.
Or keep the finish uninterrupted.

A logo cut-out and a no-logo-cut skin create different looks. Neither choice automatically changes the rest of your device coverage.

First published · Last updated

Should you keep the manufacturer's logo visible or cover it with your chosen finish? There is no wrong answer: it comes down to the appearance you prefer and the options available for your device.

The important distinction is between the logo opening and the surfaces included in your order. Choosing no logo cut does not turn a back-only skin into a full-body set.

The two looks, side by side

Logo cut-out

The logo remains exposed through a shaped opening.

The original branding becomes a contrasting detail against the vinyl. This can work well with an understated colour, Carbon Fibre-effect or a brushed-metal-effect finish.

The opening itself is not covered by that piece of vinyl.

No logo cut

The vinyl continues across the intended logo area.

An opaque finish can conceal the branding and keep the colour or pattern less interrupted. This is our starting suggestion for a quieter, less branded look.

Transparent film can cover a logo while still allowing it to be seen.

Apple logo illustration from the original XtremeSkins logo cut-out guide
Illustration retained from the original logo guide. Check the preview and logo options for your exact product before ordering.

Which looks better with your finish?

For plain colours and textures: we like a visible logo as a deliberate contrast. Textured Matt Black, Black Carbon and a brushed-metal-effect finish can all work with that approach where a cut-out is offered.

For artwork and patterned finishes: covering the logo can make the surface less visually interrupted. Check whether the particular printed design and product offer that choice; do not assume all artwork has identical configuration options.

For a minimal, less branded setup: start with no logo cut and an opaque finish. Raised or recessed surface details may still show through thin vinyl, so covering a logo is not the same as removing the physical detail underneath.

Neither choice is automatically more premium. Pick the effect you prefer, then compare the Textured Matt, Carbon Fibre and Leather-effect finish guide for the material appearance.

How to choose the logo option when ordering

  1. Find the exact product first. Use the phone selector, MacBook selector or the relevant device range. Check size and model before deciding on a finish.
  2. Choose your coverage and design. Select the finish and the sections you need. Where offered, Custom controls the separate sections; it is not itself a choice to hide the logo.
  3. Look for the dedicated logo control. Read the label beside the logo cut-out option or no-logo-cut checkbox. Choose the setting that says what you want rather than assuming that a tick always means the same thing across products.
  4. Check before paying. Review the preview and any displayed order details. If the option is missing or the wording is unclear, contact us before ordering rather than assuming a change will be made.

For example, the iPhone 16 Pro product page lists Back, Camera and Sides alongside a separate Logo Cut-out control. Those are different decisions: the selected pieces determine coverage; the logo control determines the available logo treatment.

Our customiser walkthrough explains how to review the whole configuration.

Four terms that are easy to confuse

Term What it describes What it does not promise
Logo cut-out An opening for the device's original logo Coverage of the exposed logo itself
No logo cut Vinyl across the intended logo area where that option is offered Every device surface covered or all branding invisible through clear film
Full Colour A finish or design choice for the supplied set No logo cut, or full-body coverage, just because of the name
Custom Model-specific choices for available sections and finishes Every panel, logo or finish being independently configurable

Does the choice change protection?

A logo opening leaves that area exposed. Vinyl over the logo adds a layer to that specific surface, but it does not turn a skin into impact protection or protect areas outside the supplied pieces.

Skins help with light cosmetic wear on covered surfaces. For drops, choose an appropriate protective case rather than relying on the logo setting. See our cases versus skins guide.

Clear skins: covered does not mean hidden

With transparent film, the original logo may remain visible through the material even when there is no cut-out. That can suit someone who wants to retain the device's appearance.

Clear Matt and Clear Gloss have different fitting instructions from ordinary coloured vinyl. Read the clear phone skin guide and check device suitability before choosing a clear option.

Fitting a skin with a logo opening

Check the overall alignment, not just the logo. Line up the outer edges and other cut-outs together before pressing the skin down firmly. Do not stretch the vinyl solely to pull a misplaced logo opening into position.

A small fitting margin can be intentional. Our edge-gap guide explains why a precision-cut skin does not always run exactly to the outermost edge.

Watch the guide for your device before applying. Do not cut a new logo opening with a blade while the skin is on the device.

Logo cut-out questions

Is a logo cut-out available on every device?

No. It depends on the model, material and current product configuration. Check the exact listing rather than assuming every phone, laptop or console offers the same choice.

Does selecting Custom automatically cover the logo?

No. Choose the available logo option separately and check what the label means.

Will no logo cut also cover cameras, ports or speakers?

No. It changes the intended logo opening, not the functional cut-outs or the surfaces included in the set.

Can I change my mind after fitting?

The alternative is normally a correctly specified replacement skin rather than altering the fitted piece. Follow our removal guide and contact us about the options for your model.


Steam Machine Skins Coming Soon: Customise Valve's New Gaming PC

Can I Just Skin the Middle Section of My PS5?

Mark Taylor