How to apply a Microsoft Surface Duo 2 skin
Microsoft Surface Duo 2 skin installation video
Follow our Surface Duo 2 tutorial and check the camera-area cut-outs and exterior panels before fitting. Identify the pieces supplied with your chosen coverage.
Watch on YouTube ↗Before you start
Confirm Surface Duo 2
Check the model on your order, not the original Surface Duo. Match each exterior piece to its intended location.
Prepare the surfaces
Switch off and unplug the device. Follow Microsoft's cleaning advice and let surfaces dry, keeping moisture away from openings.
Plan the fitting sequence
Use clean, dry hands and good lighting. Keep unused pieces on the backing and watch the video before starting.
Fitting your Surface Duo 2 skin
-
Check camera-area alignment
Compare the intended cut-outs and outer edges together. Do not stretch vinyl to make an opening reach.
-
Apply progressively
Follow the backing-removal method shown, smoothing each exterior panel gradually without bridging moving parts.
-
Finish small sections carefully
Follow the supplied method for shaped areas. Do not trim on the device or apply pressure to either display.
-
Inspect moving clearances
Keep screens, cameras, hinges, ports, sensors and controls clear. Stop if a skin piece catches during movement.
Installation questions
Can I use an original Surface Duo skin?
Use a skin made specifically for Surface Duo 2. Similar fitting techniques do not make different generations' panels interchangeable.
What about bubbles or lifting?
Avoid pins and extra force. Read our troubleshooting guide or send a photo.