How to apply an ASUS ZenFone 4 Max skin
Watch first. Fit with confidence.
ASUS ZenFone 4 Max skin installation video
Follow our ZenFone 4 Max video and keep the reminders below handy. Check the Max model on your order before removing any pieces from the backing.
Clear skin? Use the clear-skin wet-fitting guide, not these dry-vinyl reminders.
Pause and replay as you fit. Watch on YouTube ↗
Can't see your model listed? Use a similar model with the same skin type — the basic fitting method is the same. Cut-outs and alignment may differ, so always use a skin made for your exact device. Clear skins need the separate wet-fitting guide.
Before you start
Check the Max model
Match the full model name to your order. Identify the supplied pieces and leave unused ones on the backing.
Clean and dry
Switch off and unplug the phone. Follow the manufacturer's surface-care advice and let fitting surfaces dry.
Prepare your workspace
Use clean, dry hands, good lighting and your supplied fitting instructions.
Fitting your ZenFone 4 Max skin
Follow the video for the exact positioning and order of the coverage you selected.
-
Check all reference points
Compare the camera cut-outs and outer margins before pressing firmly. Do not pull a piece to make it reach.
-
Smooth progressively
Follow the backing-removal method shown and work gradually without touching the adhesive.
-
Finish the edges
Use gentle hairdryer warmth only where instructed. Avoid a heat gun and excessive heat.
-
Inspect before use
Keep controls, sensors and openings clear. Check that a case does not catch the fitted edges.
Installation questions
Is the standard ZenFone 4 skin the same?
Always use the skin made for your exact model. For the standard model, use the ZenFone 4 guide.
What if a piece does not align?
Stop and check the model, orientation and intended surface. Do not stretch or cut the skin on your phone.
What about bubbles or wrinkles?
Do not use a pin or extra force. See our troubleshooting guide.