How to apply an ASUS ZenFone 4 skin
Watch first. Fit with confidence.
ASUS ZenFone 4 skin installation video
Follow our ZenFone 4 video before fitting your skin. Check the full model name on your order, including whether you have the standard model or Max.
Clear skin? Follow the clear-skin wet-fitting guide instead of these dry-vinyl reminders.
Pause and replay as you fit. Watch on YouTube ↗
Can't see your model listed? Use a similar model with the same skin type — the basic fitting method is the same. Cut-outs and alignment may differ, so always use a skin made for your exact device. Clear skins need the separate wet-fitting guide.
Before you start
Confirm ZenFone 4
Match the exact device and order. Leave unused sections on their backing.
Clean and dry
Switch off and unplug your phone. Follow the manufacturer's surface-care advice and let fitting surfaces dry fully.
Set up to fit
Use clean hands and a well-lit workspace. Watch the video first with your supplied instructions nearby.
Fitting your ZenFone 4 skin
Follow the video for exact placement and order. Coverage depends on the option you ordered.
-
Compare the cut-outs
Check the camera openings and outer margins together before pressing firmly.
-
Apply gradually
Follow the backing-removal method shown. Smooth down progressively without touching the adhesive.
-
Finish without stretching
Use gentle hairdryer warmth only where instructed. Do not pull the skin to fit or make your phone hot.
-
Check before use
Keep controls, cameras and ports unobstructed. Avoid a case catching the fitted edges.
Installation questions
Is this the ZenFone 4 Max guide?
Use our ZenFone 4 Max guide for that model. The skin must match your exact device.
What if a piece will not line up?
Stop and check its orientation and the model. Do not cut the skin on your phone or stretch it into place.
What about bubbles or lifting?
Do not use a pin or extra pressure. Read the fitting troubleshooting guide.