How to apply an Huawei P10 Plus skin
Watch first. Fit with confidence.
Huawei P10 Plus skin installation video
Follow the P10 Plus video before fitting your skin. Check that the model on your order says P10 Plus, then compare each piece with its intended surface.
Clear skin? Follow our clear-skin wet-fitting guide, not these dry-vinyl reminders.
Pause and replay as you fit. Watch on YouTube ↗
Can't see your model listed? Use a similar model with the same skin type — the basic fitting method is the same. Cut-outs and alignment may differ, so always use a skin made for your exact device. Clear skins need the separate wet-fitting guide.
Before you start
Check the Plus model
Match your device and order. Leave unused sections on the backing.
Clean and dry
Switch off and unplug the phone. Follow the manufacturer's cleaning advice and let fitting surfaces dry fully.
Watch before peeling
Use clean hands, good lighting and your supplied instructions.
Fitting your P10 Plus skin
Follow the video for exact placement and order. Only fit the sections in your chosen coverage.
-
Check the reference points
Compare the camera openings and outer margins before pressing firmly. Do not stretch a piece to make it reach.
-
Apply progressively
Follow the backing-removal method shown and smooth down gradually without touching the adhesive.
-
Finish shaped edges
Use gentle hairdryer warmth only where instructed. Do not use a heat gun or make the phone hot.
-
Inspect before use
Keep controls, cameras and ports clear. Check that a case does not catch the skin.
Installation questions
Is this the standard P10 guide?
No. Use the P10 guide for that model. Always match the skin to the exact device.
What if the cut-outs do not line up?
Stop and check the model, piece and orientation. Do not stretch the skin or cut it on the phone; send a photo for help.
What about bubbles or lifting?
Do not use a pin or extra force. See our troubleshooting guide.