How to apply an Huawei P20 Pro skin
Watch first. Fit with confidence.
Huawei P20 Pro skin installation video
Use our P20 Pro video to check the fitting method before you start. Confirm the Pro model on your order and compare every camera cut-out before pressing the skin down.
Clear skin? Follow our clear-skin wet-fitting guide instead.
Pause and replay as you fit. Watch on YouTube ↗
Can't see your model listed? Use a similar model with the same skin type — the basic fitting method is the same. Cut-outs and alignment may differ, so always use a skin made for your exact device. Clear skins need the separate wet-fitting guide.
Before you start
Confirm P20 Pro
Match your phone and order. Identify the sections you selected and keep unused pieces on their backing.
Clean and dry
Switch off and unplug your phone. Follow the manufacturer's surface-care advice and allow the fitting surfaces to dry.
Prepare your workspace
Use clean hands and good lighting. Watch the video first and keep the supplied instructions nearby.
Fitting your P20 Pro skin
Use the video for the exact positioning and application order of your selected coverage.
-
Check camera alignment
Compare all camera openings and the outer margins before pressing firmly. Do not stretch one area to correct another.
-
Apply progressively
Follow the backing-removal method shown. Smooth down gradually and avoid touching the adhesive.
-
Finish shaped areas
Use gentle hairdryer warmth only where instructed. Avoid a heat gun and excessive heat.
-
Inspect the finished fit
Keep cameras, controls and ports unobstructed. Check that a case does not catch the fitted edges.
Installation questions
Can I use a P20 Lite skin?
Always use the skin made for your exact model. For P20 Lite, use its dedicated fitting guide.
What if a camera opening looks wrong?
Stop and check the model, orientation and whole piece. Do not stretch the vinyl or cut it on the phone.
What about bubbles or lifting?
Do not use a pin or extra force. See the troubleshooting guide.